简介: AST轴承NJ219EM 类型为圆柱滚子轴承,内径:95mm 外径:170mm 厚度:32mm轴承主要应用于化学品存储及分装设备,机床车床,美发设备,风淋室等,工业仪器,光谱仪,血凝试剂,印章设备,果蔬加工,液压压力表,立式内拉等,更多详细资料您可致电我司,获取AST NJ219EM轴承配合尺寸,重量,额定动负荷,载荷,NJ219EM极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等!咨询电话:022-58519723/22/21
圆柱滚子轴承NJ219EM样本图纸

(dimensions in mm)
Bearing Type - NJ
Bore Dia (d) - 95.0000
Outer Dia (D) - 170.0000
Width (B) - 32.0000
Radius (min) (rs) - 2.100
Dynamic Load Rating (Cr) - 210,000
Static Load Rating (Cor) - 249,000
Max Speed (Grease) (X1000 RPM) - 4
Max Speed (Oil) (X1000 RPM) - 5
Max. Shaft Shoulder Dia. Inner (Li) - 112.5
Min. Housing Shoulder Dia., Outer (Lo) - 155.0
Weight (g) - 3,250.00
Precision - RBEC 1
Standard Clearance - C0
Material - 52100 Chrome steel, or equivalent
Unless otherwise specified, the internal radial clearance is "C0" or "C Normal".
This bearing is also available with the HJ end plate for the inner race.
Suffix definitions are listed in the Nomenclature Technical document.
This bearing is also available with a retaining ring groove in the outer race, and it can be supplied with the ring (suffix NR) or without the ring (suffix N). Please see the Technical Information Sheet for the groove and ring dimensions.

相同尺寸同类型近似型号
ISB N219 KOYO N219 NKE NJ219-E-M6 CONSOLIDATED NU-219 NTN NU219E ISB NUP219 NACHI NU219 CONSOLIDATED NU-219E NACHI NU219TS NKE NUP219-E-MPA NACHI NUP219E CONSOLIDATED NF-219E CRAFT NJ219 NKE NJ219-E-TVP3+HJ219-E NSK NJ219EM CONSOLIDATED NF-219 FBJ NUP219 CX N219E ISO NH219 NACHI NJ219E随机推荐型号
品牌列表
经营品牌
精选轴承型号