GAC80T轴承

(dimensions in mm)

Bearing Type - steel-on-PTFE fabric

Bore Dia (d) - 80.0000

Outer Dia (D) - 125.0000

Width (B) - 29.0000

Outer Width (Bo) - 25.5000

Inner Width (Bi) - 29.0000

Dynamic Load Rating (Cr) - 450,000

Static Load Rating (Cor) - 1,120,000

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 1.100

Max. housing corner radius, or 45 deg. chamfer (ch) - 1.100

Spherical Diameter (dk or Dk) - 115.000

Mis-alignment Angle (a deg.) - 3.5

Spherical Center Location (S) - 9

Weight (g) - 1,540.00

Material - 52100 Chrome steel, or equivalent

This spherical plain bearing has a PTFE fabric liner, the inner ring is hard chrome plated on the sliding surface.

A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.

The bearing must be protected from dirt and contamination.