GAC180T轴承

(dimensions in mm)

Bearing Type - steel-on-PTFE fabric

Bore Dia (d) - 180.0000

Outer Dia (D) - 280.0000

Width (B) - 64.0000

Outer Width (Bo) - 61.0000

Inner Width (Bi) - 64.0000

Dynamic Load Rating (Cr) - 2,440,000

Static Load Rating (Cor) - 6,100,000

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 3.000

Max. housing corner radius, or 45 deg. chamfer (ch) - 3.000

Spherical Diameter (dk or Dk) - 260.000

Mis-alignment Angle (a deg.) - 1

Spherical Center Location (S) - 21

Weight (g) - 17,400.00

Material - 52100 Chrome steel, or equivalent

This spherical plain bearing has a PTFE fabric liner, the inner ring is hard chrome plated on the sliding surface.

A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.

The bearing must be protected from dirt and contamination.