NUP-318E轴承

更新日期：2026-04-10

简介: CONSOLIDATED轴承NUP-318E 类型为圆柱滚子轴承，内径：90mm 外径：190mm 厚度：43mm轴承主要应用于牙体充填,触角电位,纸加工机,起重链条,地理仪器,杂项仪器,检验设备,激光切割,挤齿机等,劳保员工安全防护,气缸特殊等，更多详细资料您可致电我司，获取CONSOLIDATED NUP-318E轴承配合尺寸,重量,额定动负荷,载荷,NUP-318E极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等！咨询电话:022-58519723/22/21

圆柱滚子轴承NUP-318E样本图纸

Dimensions (metric)	d	90
	J	124.7
	F	113.5
	D	190
	B	43
Approx. Wgt. lbs		14.000
Interchange	FAG	NUP 318 E
	Rollway	LP 1318 U
	SKF	NUP 318 E
	STEYR	NUP 318 E
	Torrington	-

* "E" suffix designates higher radial load capacity derived by utilizing longer rollers. ** "J" dimension equal to FAG and SKF. Other manufacturers "J" dimension may vary. 1) The above series is available with either: Stamped steel or glass fibre cage - No suffix. Machined bronze cage - suffix "M". 2) These bearings are available in C/2, C/3, C/4, W/23 and C/5 internal clearance. 3) Some sizes are available in ABEC #3 (P/6) precision. 4) This series has the same boundary dimensions as the equivalent Norma Hoffmann R-300-LL Series. The load carrying capacity of this series is greater than the comparable R-300-LL series.

相同尺寸同类型近似型号

SIGMA NU318 NKE NJ318-E-TVP3 KOYO NF318 NKE NJ318-E-MPA CX NP318E FBJ NJ318 FAG NJ318-E-TVP2 ISO NU318 NSK NJ318 KOYO NU318 CONSOLIDATED NJ-318E NACHI 21318AX NACHI NUP318 NACHI NU318E FAG N318-E-M1 FAG NJ318-E-TVP2+HJ318-E ISO NP318 CONSOLIDATED N-318 NTN NU318E NKE NUP318-E-TVP3

随机推荐型号

品牌列表

轴承产品
轴承系列
内径
外径
厚度

CONSOLIDATED NUP-318E
圆柱滚子轴承
90
190
43
CX 7338 B-UD
角接触球轴承
190
400
156
SKF GEZH 204 ES
关节轴承
100.013
57.15
58.877
KOYO HK1216.2RS
滚针轴承
12
18
16
NSK NNU 4930
圆柱滚子轴承
150
210
60
SKF PCM 11512070 E
关节轴承
115
120
70