NUP-307E轴承

更新日期：2025-11-03

简介: CONSOLIDATED轴承NUP-307E 类型为圆柱滚子轴承，内径：35mm 外径：80mm 厚度：21mm轴承主要应用于印模材料,塑料造粒,丝锥磨床,加温风机,昆虫捕捉,食品添加,起重链条,农用化学,油桶加热,螺纹磨床,染料颜料等，更多详细资料您可致电我司，获取CONSOLIDATED NUP-307E轴承配合尺寸,重量,额定动负荷,载荷,NUP-307E极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等！咨询电话:022-58519723/22/21

圆柱滚子轴承NUP-307E样本图纸

Dimensions (metric)	d	35
	J	50.8
	F	46.2
	D	80
	B	21
Approx. Wgt. lbs		1.340
Interchange	FAG	NUP 307 E
	Rollway	LP 1307 U
	SKF	NUP 307 E
	STEYR	NUP 307 E
	Torrington	NUP 307 E

* "E" suffix designates higher radial load capacity derived by utilizing longer rollers. ** "J" dimension equal to FAG and SKF. Other manufacturers "J" dimension may vary. 1) The above series is available with either: Stamped steel or glass fibre cage - No suffix. Machined bronze cage - suffix "M". 2) These bearings are available in C/2, C/3, C/4, W/23 and C/5 internal clearance. 3) Some sizes are available in ABEC #3 (P/6) precision. 4) This series has the same boundary dimensions as the equivalent Norma Hoffmann R-300-LL Series. The load carrying capacity of this series is greater than the comparable R-300-LL series.

相同尺寸同类型近似型号

CONSOLIDATED NU-307 ISB NJ307 KOYO NU307 NACHI NU307 NACHI NU307EG CONSOLIDATED NUP-307E CONSOLIDATED NF-307E NKE NU307-E-TVP3 CRAFT N307 NSK NU307EM NKE NUP307-E-MPA SIGMA NUP307 CX NJ307E NTN NU307E SIGMA NJ307 FAG N307-E-TVP2 CONSOLIDATED NUP-307 KOYO NUP307 SIGMA N307 NACHI 21307AXK

随机推荐型号

品牌列表

轴承产品
轴承系列
内径
外径
厚度

CONSOLIDATED NUP-307E
圆柱滚子轴承
35
80
21
NACHI 6303NSE
深沟球轴承
17
47
14
NACHI 6804ZE
深沟球轴承
20
32
7
NTN MR142216
滚针轴承
22.225
34.925
25.4
NTN PK12×17×9.8X2
滚针轴承
12
17
SNR USFL207
轴承单元
35