NUP-214E轴承

更新日期：2026-08-01

简介: CONSOLIDATED轴承NUP-214E 类型为圆柱滚子轴承，内径：70mm 外径：125mm 厚度：24mm轴承主要应用于触角电位,油剂油脂,工程机械,工作台,动力源,光治疗仪,清洁设备,吊钩,SPA设备,起重滑车,噪声检查等，更多详细资料您可致电我司，获取CONSOLIDATED NUP-214E轴承配合尺寸,重量,额定动负荷,载荷,NUP-214E极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等！咨询电话:022-58519723/22/21

圆柱滚子轴承NUP-214E样本图纸

Dimensions (metric)	d	70
	J	89.55
	F	83.5
	D	125
	B	24
Approx. Wgt. lbs		3.190
Interchange	FAG	NUP 214 E
	Rollway	LP 1214 U
	SKF	NUP 214 E
	STEYR	NUP 214 E
	Torrington	-

* "E" suffix designates higher radial capacity derived by utilizing longer rollers. ** "J" dimension equal to FAG and SKF. Other manufacturers "J" dimension may vary. 1) The above series is available with either: Stamped steel or glass fibre cage - No suffix. Machined bronze cage - suffix "M". 2) These bearings are available in C/2, C/3, C/4, W/23 and C/5 internal clearance. 3) Some sizes are available in ABEC #3 (P/6) precision. 4) This series has the same boundary dimensions as the equivalent Norma-Hoffman R-100-LL series. The load carrying capacity of this series is greater than the comparable R-100-LL series

相同尺寸同类型近似型号

ISO NJ214 AST NJ214E CRAFT N214 NKE NJ214-E-MA6+HJ214-E FAG NJ214-E-TVP2 CRAFT NJ214 FAG NJ214-E-TVP2+HJ214-E FBJ NJ214 NACHI NU214 ISO NP214 NKE NJ214-E-MA6 AST NJ214ETN CYSD NU214E CONSOLIDATED N-214 NKE NJ214-E-M6 NKE NUP214-E-M6 CONSOLIDATED NJ-214E CX NU214E NKE NUP214-E-MPA NTN NUP214E

随机推荐型号

品牌列表

轴承产品
轴承系列
内径
外径
厚度

CONSOLIDATED NUP-214E
圆柱滚子轴承
70
125
24
NSK NN 3008
圆柱滚子轴承
40
61
21
CX QJ315
角接触球轴承
75
160
37
IKO RNAF 203212
滚针轴承
20
32
12
CX UCFC209
轴承单元
45
CONSOLIDATED W-43/4
推力球轴承