S1PPG7-3轴承

(dimensions in inches)

Bearing Type - with snap ring

Bore Dia (d) - 0.2500

Outer Dia (D) - 0.6250

Outer Width (Bo) - 0.1960

Inner Width (Bi) - 0.4219

Dynamic Load Rating (Cr) - 168

Static Load Rating (Cor) - 77

Collar Width (i) - 0.1880

Bearing Collar Outside Dia. (J) - 0.5630

Bearing Collar Set Screw (L) - 8-36 UNF

Snap Ring Dia. (G) - 0.7340

Snap Rinf Location (Sd) - 0.7000

Snap Ring Thickness (I) - 0.0260

Material - 52100 chrome steel, or equivalent

The bearing comes with a retaining ring.

Bore tolerance = +0000" / -.0005"

Outside diameter tolerance = .0000" / -.0004"

Outer race width tolerance = .000" / -.005"

Inner race width tolerance = .000" / -.005"

All tolerances ABEC 1 except where noted.

Two rubber seals

Mating shaft recommended tolerance: +.0000" / -.0005"