简介: AST轴承NJ222EMA 类型为圆柱滚子轴承,内径:110mm 外径:200mm 厚度:38mm轴承主要应用于倒角弯管,电磁阀,面积测量,汽缸体类,血球试剂,打包带工具,滚珠丝杠,起重提升,物料搬运设备,质谱仪,冲压模具等,更多详细资料您可致电我司,获取AST NJ222EMA轴承配合尺寸,重量,额定动负荷,载荷,NJ222EMA极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等!咨询电话:022-58519723/22/21
圆柱滚子轴承NJ222EMA样本图纸
(dimensions in mm)
Bearing Type - NJ
Bore Dia (d) - 110.0000
Outer Dia (D) - 200.0000
Width (B) - 38.0000
Radius (min) (rs) - 2.100
Dynamic Load Rating (Cr) - 279,000
Static Load Rating (Cor) - 343,000
Max Speed (Grease) (X1000 RPM) - 3
Max Speed (Oil) (X1000 RPM) - 4
Max. Shaft Shoulder Dia. Inner (Li) - 132.5
Min. Housing Shoulder Dia., Outer (Lo) - 180.5
Weight (g) - 5,690.00
Precision - RBEC 1
Standard Clearance - C0
Material - 52100 Chrome steel, or equivalent
Unless otherwise specified, the internal radial clearance is "C0" or "C Normal".
This bearing is also available with the HJ end plate for the inner race.
Suffix definitions are listed in the Nomenclature Technical document.
This bearing is also available with a retaining ring groove in the outer race, and it can be supplied with the ring (suffix NR) or without the ring (suffix N). Please see the Technical Information Sheet for the groove and ring dimensions.
相同尺寸同类型近似型号
NACHI NUP222 CRAFT NJ222 FAG NJ222-E-TVP2 SIGMA N222 NKE NJ222-E-TVP3 NKE NJ222-E-M6+HJ222-E NACHI NUP222E ISB NJ222 CONSOLIDATED NU-222E CONSOLIDATED NUP-222 CX NUP222E ISO NF222 CONSOLIDATED N-222E NACHI NJ222 KOYO NJ222 NTN NJ222 CX NH222E KOYO N222 NSK NU222EM NKE NJ222-E-MA6随机推荐型号
品牌列表
经营品牌
精选轴承型号