简介: AST轴承NJ2220EM 类型为圆柱滚子轴承,内径:100mm 外径:180mm 厚度:46mm轴承主要应用于冶金模具,堆高车升降平台,洗纹身机,装卸搬运机械和各类产业机械,生物化工,手推车,医用椅等,温湿检测,煤炭,昆虫实验分析仪器,元素检测等,更多详细资料您可致电我司,获取AST NJ2220EM轴承配合尺寸,重量,额定动负荷,载荷,NJ2220EM极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等!咨询电话:022-58519723/22/21
圆柱滚子轴承NJ2220EM样本图纸

(dimensions in mm)
Bearing Type - NJ
Bore Dia (d) - 100.0000
Outer Dia (D) - 180.0000
Width (B) - 46.0000
Radius (min) (rs) - 2.100
Dynamic Load Rating (Cr) - 319,000
Static Load Rating (Cor) - 418,000
Max Speed (Grease) (X1000 RPM) - 3
Max Speed (Oil) (X1000 RPM) - 4
Max. Shaft Shoulder Dia. Inner (Li) - 119.0
Min. Housing Shoulder Dia., Outer (Lo) - 163.0
Weight (g) - 5,220.00
Precision - RBEC 1
Standard Clearance - C0
Material - 52100 Chrome steel, or equivalent
Unless otherwise specified, the internal radial clearance is "C0" or "C Normal".
This bearing is also available with the HJ end plate for the inner race.
Suffix definitions are listed in the Nomenclature Technical document.
This bearing is also available with a retaining ring groove in the outer race, and it can be supplied with the ring (suffix NR) or without the ring (suffix N). Please see the Technical Information Sheet for the groove and ring dimensions.

相同尺寸同类型近似型号
NTN NUP2220E NTN NJ2220 NKE NUP2220-E-M6 CONSOLIDATED NU-2220 FBJ NU2220 CONSOLIDATED NUP-2220 NACHI 22220AEXK ISO NCF2220V ISO NUP2220 NACHI NUP2220E KOYO NUP2220R NSK NUP2220ET NKE NJ2220-E-TVP3 NACHI NU2220E CYSD NJ2220E CX NP2220E NKE NU2220-E-MPA CONSOLIDATED NJ-2220E SIGMA NU2220 SIGMA NJ2220随机推荐型号
品牌列表
经营品牌
精选轴承型号