简介: AST轴承NJ2209EM 类型为圆柱滚子轴承,内径:45mm 外径:85mm 厚度:23mm轴承主要应用于传输分配,手术器械,绣花布类,吊具系列,设备及配件,成型机类,海拔仪等,家电,非机动车,仪器仪表,粉末冶金等,更多详细资料您可致电我司,获取AST NJ2209EM轴承配合尺寸,重量,额定动负荷,载荷,NJ2209EM极限转速,游隙, 轴承的图纸、样品、价格或者替换产品等!咨询电话:022-58519723/22/21
圆柱滚子轴承NJ2209EM样本图纸
(dimensions in mm)
Bearing Type - NJ
Bore Dia (d) - 45.0000
Outer Dia (D) - 85.0000
Width (B) - 23.0000
Radius (min) (rs) - 1.100
Dynamic Load Rating (Cr) - 73,900
Static Load Rating (Cor) - 81,600
Max Speed (Grease) (X1000 RPM) - 8
Max Speed (Oil) (X1000 RPM) - 9
Max. Shaft Shoulder Dia. Inner (Li) - 54.5
Min. Housing Shoulder Dia., Outer (Lo) - 76.5
Weight (g) - 600.00
Precision - RBEC 1
Standard Clearance - C0
Material - 52100 Chrome steel, or equivalent
Unless otherwise specified, the internal radial clearance is "C0" or "C Normal".
This bearing is also available with the HJ end plate for the inner race.
Suffix definitions are listed in the Nomenclature Technical document.
This bearing is also available with a retaining ring groove in the outer race, and it can be supplied with the ring (suffix NR) or without the ring (suffix N). Please see the Technical Information Sheet for the groove and ring dimensions.
相同尺寸同类型近似型号
NSK NJ2209ET NSK NU2209ET NACHI NU2209EG ISO NCF2209V FBJ NU2209 NACHI NJ2209EG NACHI NJ2209 ISO NU2209 NTN NJ2209 NACHI 22209EX NKE NJ2209-E-MPA+HJ2209-E CX NCF2209V CONSOLIDATED NU-2209E ISO SL182209 SIGMA N2209 NACHI NU2209 NKE NJ2209-E-MPA NACHI 22209AEX CONSOLIDATED NUP-2209 NTN NU2209E随机推荐型号
品牌列表
经营品牌
精选轴承型号