KSP10轴承

(dimensions in inches)

Bearing Type - KSPxx

Bore Dia (d) - 0.6250

Outer Dia (D) - 1.9375

Outer Width (Bo) - 0.6250

Inner Width (Bi) - 0.8130

Dynamic Load Rating (Cr) - 4,360

Static Load Rating (Cor) - 5,320

Max. Shaft Shoulder Dia. Inner (Li) - 0.9

Ball Qty - 14

Ball Dia (Dw) - 0.2810

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.044

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 4980 pounds.

The static thrust load rating is 600 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.